Approved and autorized according to the Elektrozulassungs-Bergverordnung (EIZulBergV), dated December 21, 1983
In line with the material specifications of the European standard EN 50014 and EN 50018

EExd I / Ex -FLP- Flameproof heating element.

Pressure traverses of high-strength material

Each heating element has a stainless steel casing and is equipped with a FLP twin-plug. This system does not require any additional electric distribution device.

To comply with underground requirements steel traverses are used for underground operations. Thanks to the availability of high-strength materials it is now possible to keep the weight of traverses low. Transportation and handling is feasible without any auxiliary means

The separate heating elements are placed on the bottom pressure traverses in the running direction of the conveyor belt. Guide cams are used to provide firm support for the heating elements. The heating elementshave a standard width of 215 mm.

The bottom heating/pressing sheets are placed on the bottom heating elements. Acuurate positioning is guaranteed by the guide supports on the belt splice is done according to manufacturer's instructions.

The heating/pressing plates for the KLIV SCH/FLP are made of stainless steel. They are equipped with guide supports for the location of the heating elements. These supports can also be used as carrying handles. A sending unit is welded on each plate for the temperature sensor.

The top heating elements are attached and accurately aligned with the bottom elements. Carefully push traction bolts up to the stops. Then tighten simultaneously and uniformly on both sides until the needle of the gauge has reached the "green" mark. This procedure is repeated with each traverse.

EExd I / Ex -FLP- Flameproof vulcanizing press.

Special pneumatic turbo screwdriver with torque multiplier

Only one power supply cable each up to 50 Amps is required for connecting top and bottom press to the electric mains. All heating elements are interconnected in parallel.

To apply the hydraulic pressure to the traverses. Alternatively the hydraulic pressure can be applied by means of a ratchet in connection with the torque multiplier.

Special container

Remote thermometers

For trouble-free underground transport all KLIV SCH FLP presses can be delivered in special containers, the size of which fits all known underground transportation systems (e.g. monorail and track haulage means)

A remote thermometer facilitates monitoring the temperature development.